Language selection

Government of Canada

Search

Explosives Regulations, 2013 (SOR/2013-211)

Regulations are current to 2026-10-29 and last amended on 2026-10-21. Previous Versions

PART 5Manufacturing Explosives (continued)

DIVISION 1Manufacturing Explosives under a Division 1 Factory Licence or a Satellite Site Certificate (continued)

SUBDIVISION dRequirements for Workers, Visitors and Other People (continued)

Client Sites

Marginal note:Performance-diminishing substance

  •  (1) A person at a client site must not be within 15 m of an operating mobile process unit and its charging hose if they are under the influence of or are carrying alcohol or another performance-diminishing substance. However, a person who has taken a prescription drug may enter the area if they have medical proof that they need the drug and that it will not impede their ability to function safely.

  • Marginal note:Hazards

    (2) A person at a client site must not be in possession of any thing, or carry out any activity, within 15 m of a mobile process unit and its charging hose if the thing or activity could increase the likelihood of an accidental ignition.

DIVISION 2Manufacturing Explosives under a Division 2 Factory Licence or a Manufacturing Certificate

Interpretation

Marginal note:Definitions

 The following definitions apply in this Division.

competent person

competent person means a person described in subsection 122(2). (personne compétente)

division 2 factory licence

division 2 factory licence means a licence that is issued by the Minister under paragraph 7(1)(a) of the Explosives Act authorizing a manufacturing activity referred to in section 53 at a workplace. (licence de fabrique de la section 2)

manufacturing certificate

manufacturing certificate means a certificate that is issued by the Minister under paragraph 7(1)(c) of the Explosives Act and authorizes an activity referred to in section 107 at a workplace. (certificat de fabrication)

worker

worker means a person who is at a workplace to carry out a manufacturing operation or some other kind of work (for example, maintenance of facilities or repair of equipment) for the holder of a division 2 factory licence. (travailleur)

workplace

workplace means a building, room or area where an activity involving the manufacture of explosives, including their storage, is carried out. (lieu de travail)

SUBDIVISION aAuthorized Activities

Marginal note:Authorized activities

  •  (1) A holder of a division 2 factory licence or manufacturing certificate may carry out those of the following activities that are specified in the licence or certificate at a workplace specified in the licence or certificate:

    • (a) [Repealed, SOR/2026-206, s. 28]

    • (b) the manufacture of small arms cartridges, including small arms cartridges authorized as type D explosives, for sale and the storage of up to 225 kg of explosives contained in the cartridges and up to 75 kg of propellant powder in containers to be used in manufacturing the cartridges;

    • (c) the manufacture of any explosives for the purpose of conducting an experiment, demonstration, test or analysis at a school, college, university or other learning institution or by a law enforcement or government agency and the storage of up to 5 kg of the manufactured explosives;

    • (d) the manufacture of any explosives for the purpose of conducting an experiment, test or analysis by a private or commercial laboratory and the storage of up to 5 kg of the manufactured explosives;

    • (e) the manufacture of consumer fireworks for personal use and the storage up to 25 kg of the manufactured fireworks;

    • (f) the manufacture of display fireworks for personal use and the storage up to 25 kg of the manufactured fireworks;

    • (f.1) the manufacture of F.5 novelty devices for personal use;

    • (g) the manufacture of rocket motors for personal use and the storage of up to 25 kg of manufactured rocket motors and propellant powder (combined quantity) to be used in manufacturing the motors;

    • (h) the manufacture and storage of black powder charges for ceremonial use;

    • (i) the assembly, packaging and storage of display fireworks at a location other than the site of the display;

    • (j) the non-mechanical mixing of non-explosive components for the purpose of manufacturing industrial explosives at the site where they will be used;

    • (k) the preparation and packaging of assortments of explosives for the purpose of sale;

    • (l) the manufacture of multi-ingredient kits, including reactive target kits, and the storage of the kits;

    • (m) the manufacture of explosives determined by the Minister to be of similar risk of harm to people or property when compared to other activities listed under this subsection; or

    • (n) any activity relating to the destruction of explosives other than type D, E or I explosives.

  • Marginal note:Transportation of black powder charges

    (2) For the purpose of transporting black powder charges manufactured under paragraph (1)(h), the charges are classified as UN 0027.

Marginal note:Acquisition

  •  (1) A holder of a manufacturing certificate may acquire an explosive if it is specified in the certificate and will be used to manufacture another explosive whose manufacture is authorized by the certificate.

  • Marginal note:Storage

    (2) A holder of a division 2 factory licence or manufacturing certificate must ensure that every workplace and magazine is

    • (a) constructed and maintained so that it is well-ventilated and resistant to theft, weather and fire; and

    • (b) located at an acceptable distance from surrounding structures and infrastructure and places where people are likely to be present.

  • Marginal note:Criteria — acceptable distance

    (2.1) For the purposes of paragraph (2)(b), acceptable distance is determined by the Minister on the basis of risk of harm to people or property, taking into account the quantity and type of explosives that are to be manufactured, the raw material to be used, the manufacturing operations to be carried out, the strength, proximity and use of surrounding structures and infrastructure and the number of people likely to be in the vicinity of the unit, magazine or facility.

  • Marginal note:Sale

    (3) A holder of a division 2 factory licence or manufacturing certificate that authorizes the manufacture of an explosive for sale may sell that explosive. The holder must comply with the terms and conditions of the licence or certificate and with the provisions that apply to sale in Parts 10 to 18.

  • Marginal note:Use

    (4) A holder of a division 2 factory licence or manufacturing certificate that authorizes the manufacture of fireworks must comply with the provisions that apply to the use of fireworks in Parts 16 to 18.

SUBDIVISION bApplication

Marginal note:Application for licence or certificate

  •  (1) An applicant for a division 2 factory licence or a manufacturing certificate must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must state whether the application is for a licence or a certificate and must include the following information:

    • (a) the name, address, telephone number and email address of both the applicant and a contact person;

    • (b) the type of explosive, and the quantity, to be manufactured or stored;

    • (c) if the application is for a certificate, the period for which the certificate is requested;

    • (d) a description of the workplace, all equipment in the workplace that is related to the manufacture of explosives and all protective barriers in the workplace;

    • (e) a description of all equipment in the workplace that is not related to the manufacture of explosives, but could increase the likelihood of an ignition;

    • (f) the number of people authorized in the workplace when explosives are present; and

    • (g) an emergency response plan that includes a fire safety plan that sets out

      • (i) the measures to be taken to minimize the likelihood of a fire at the site and to control the spread of any fire,

      • (ii) the emergency procedures to be followed in case of a fire, including

        • (A) activation of the alarms,

        • (B) notification of the fire department, and

        • (C) evacuation procedures, including evacuation routes and safe assembly places,

      • (iii) the circumstances in which a fire should or should not be fought and a procedure for determining whether a fire should be fought, and

      • (iv) the measures to be taken to train employees in the measures, procedures and circumstances described in the plan.

  • Marginal note:Site plan

    (2) The application must include a site plan that shows

    • (a) the location of the workplace within any building or structure;

    • (b) the geographical coordinates of any outdoor area included in the workplace;

    • (c) the location of the barriers and equipment described in paragraphs (1)(d) and (e);

    • (d) the distance in metres between the barriers and equipment described in paragraphs (1)(d) and (e);

    • (e) the location of the workplace within the locality;

    • (f) the area surrounding the site that is exposed to the hazards (for example, debris or blast effect) that could result from an ignition of the explosives to be manufactured or stored at the site;

    • (g) each vulnerable place within that area; and

    • (h) the distance in metres between the workplace and each vulnerable place.

  • Marginal note:Fees

    (3) The applicant for a division 2 factory licence or a manufacturing certificate must pay the applicable fees set out in Part 19.

SUBDIVISION cRequirements for Holders

Workplace

Marginal note:Responsibilities of holder

 A holder of a division 2 factory licence or a manufacturing certificate must ensure that the requirements relating to the workplace set out in sections 111 to 115 are met in the workplace.

Marginal note:Means of escape

  •  (1) The workplace must have a means of escape that will permit all people in the workplace to leave it quickly and easily in an emergency.

  • Marginal note:Lighting, electrical and heating systems

    (2) The lighting, electrical and heating systems that are used in the workplace must not increase the likelihood of an ignition.

Marginal note:Compatibility

  •  (1) Every thing that is in a workplace must be made from materials that are compatible with the explosives and raw material in the workplace.

  • Marginal note:Incompatible things

    (2) However, a thing that is not compatible with an explosive or raw material in the workplace but is required for manufacturing may be brought to the workplace for immediate use. It must be removed as soon as the circumstances permit after its use, unless the division 2 factory licence or manufacturing certificate authorizes its storage in the workplace.

  • Marginal note:Open-flame device

    (3) An open-flame device or open-element electrical appliance must not be stored in a part of the workplace where explosives are being manufactured.

Marginal note:Activities prohibited

  •  (1) When explosives are being manufactured or stored at a workplace, no other activities may be carried out there.

  • Marginal note:Competent person

    (2) All manufacturing operations at the workplace must be carried out by a competent person.

  • Marginal note:Condition of workplace

    (3) The workplace must be kept clean, dry and organized. Any spill of explosives, raw material or other material must be cleaned up as soon as the circumstances permit to eliminate any possibility of an ignition.

  • Marginal note:Foreign matter

    (4) If the likelihood of an ignition could be increased as a result of foreign matter (for example, bolts, gravel or grit) being present in or mixed with any raw material, or explosive used as raw material, the material must be carefully examined and passed through a sieve or treated to remove or exclude the foreign matter before manufacturing begins.

  • Marginal note:Containers

    (5) All raw material, explosive substances and explosives waste must be kept in closed containers that prevent spills and contamination. The contents of each container must be clearly identified on a label attached to the container.

  • Marginal note:Disposal of waste and contaminated material

    (6) All explosives waste and explosives-contaminated material must be destroyed in a manner that does not increase the likelihood of an accidental ignition during or after the destruction.

  • Marginal note:Removal of explosives

    (7) Unless the division 2 factory licence or manufacturing certificate provides otherwise, explosives must be removed as soon as the circumstances permit after they are manufactured from the part of the workplace where they were manufactured to the part of the workplace where they will be stored.

  • Marginal note:Decontamination

    (8) A workplace that is no longer being used to manufacture explosives must be decontaminated as soon as the circumstances permit. Contaminated equipment at the workplace must be decontaminated before it is removed.

  • Marginal note:Thunderstorms

    (9) On the approach of a thunderstorm, all manufacturing operations in the workplace must be shut down and all people in the workplace must be immediately moved to a safe place. Until the storm passes, the operations must remain shut down and the people must not be permitted to return.

Marginal note:Maintenance

  •  (1) Maintenance and repair work done at or to a workplace, or to equipment in it, must be carried out by a competent person.

  • Marginal note:Hazardous work

    (2) Any work that involves the use of a device that produces heat, flame or sparks or involves grinding or impact must be done in a manner that does not increase the likelihood of an ignition.

Marginal note:Warning sign

 A sign that warns against unauthorized entry must be posted at each entrance to the workplace.

Labelling

Marginal note:Responsibilities of holder

 A holder of a division 2 factory licence or a manufacturing certificate must ensure that the labelling requirements set out in section 117 are met at the workplace.

 

Page Details

Date modified: