Steel Derivative Goods Surtax Remission Order (SOR/2026-34)

(a) Adapters for crossing gates, of steel, safety sensitive, with an assembled length of 32 inches, with an assembled width of 12 inches, with an assembled height of 7 inches;

(b) Glare screen systems, of 25-gauge steel sheet of grades AISI 1008 or 1010, hot-dip galvanized to ASTM A653 with a G90 coating and powder-coated, supplied with 0.75 inch attachment hardware, concrete expansion anchors, and splice plates of 4140/42 steel with a thickness of 0.375 inch, with all hardware galvanized

(a) Turnbuckle stud assemblies for cable-barrier systems, of steel, including threaded stud and nut, with a diameter of 1 inch, with a length of 7.87 inches, galvanized;

(b) Cable spacers for cable-barrier systems, of steel, with a length of 0.15 m, galvanized;

(c) Sleeve covers for cable-restraint system posts, of steel, with a width of 0.15 m, with a length of 0.2 m, hot-dip galvanized;

(d) Dust covers for cable-restraint system posts, of steel, with a diameter of 180 mm, with a depth of 50 mm, galvanized;

(e) Cable-barrier posts, of carbon steel, with a nominal height of 5.7 feet, with a length of 1.52 m, 10-gauge, galvanized;

(f) Short posts for cable-barrier systems, of carbon steel with a length of 1.2 m, galvanized;

(g) Post straps for cable-barrier systems, of steel, with a thickness of 6 mm, galvanized;

(h) Post caps for cable-barrier systems, of steel, stamped, with a nominal height of 7.7 feet, with a width of 0.15 m, with a length of 0.15 m, hot-dip galvanized;

(i) Washers, of carbon steel, with an inner diameter of 0.31 inch, with a zinc coating;

(j) Washers, of hardened steel, of specification ASTM F436, with a diameter of 0.75 inch;

(k) Hex nuts, of steel, of specification ASTM A194 2H, with a diameter of 0.75 inch;

(l) Hex bolts, of steel, of specification ASTM A307, with a diameter of 0.31 inch, with a length of 1.75 inches;

(m) Structural hex bolts, of steel, of a standard ASTM A325, with a diameter of 0.75 inch, with a length of 4.50 inches;

(n) Post straps, of steel, with a thickness of 6 mm, with a length of 0.2 m, galvanized;

(o) Hook bolts, of steel, with threaded section and formed hook end, with a diameter of 0.31 inch, with a length of 1.75 inches, for use with cable-barrier post assemblies;

(p) Guardrail offset blocks or king blocks, of high-density polyethylene (HDPE), with a thickness of 4 inches, with a height of 7.5 inches, with a length of 14 inches;

(q) Cable lock bolts, of steel, with a locking head for cable retention, with a diameter of 0.31 inch, for use in cable-barrier assemblies;

(r) Lower posts for cable restraint system, of galvanized steel, with a length of 84 inches, for use in roadside barrier systems;

(s) Post caps, of steel, stamped, galvanized, with a width of 150 mm, with a length of 150 mm;

(t) Washers, of hardened steel, of specification ASTM F436, with a diameter of 1 inch;

(u) Retroflective panels, of steel, with a width of 5 inches, with a length of 24 inches, galvanized or coated;

(v) Cable stud assemblies, of steel, with a diameter of 25 mm, machined threads;

(w) Terminal posts, of steel, for Test Level (TL-4) barrier systems, with a length of 71.62 inches, galvanized;

(x) Driven sleeves, of steel, with a wall thickness of 0.19 inch and with a length of 30.75 inches, galvanized finish;

(y) Base angles for cable anchor, of steel, with a thickness of 12 mm, with a width of 150 mm, with a length of 150 mm, galvanized finish;

(z) Cable-restraint post brackets, of steel, with a thickness of 6 mm;

(z.1) Line posts for a cable-control terminal of steel, galvanized;

(z.2) Cable-restraint posts, of steel, galvanized, with a length of 0.61 m, supplied as an upper release-post assembly;

(z.3) End terminals for roadside guardrail systems, of steel, meeting MASH Test Level 3 performance criteria, consisting of posts, release hardware and anchorage components;

(z.4) Hex nuts, of carbon steel, of a standard ASTM A563, with a diameter of 0.31 inch;

(z.5) Hex nuts, of steel, of a standard ASTM A194 2H, with a diameter of 1 inch;

(z.6) Insulated metal panels, consisting of two profiled steel facings bonded to a rigid polyisocyanurate foam core, with a width of 40 inches, with a thickness of 3 inches or 4.5 inches, of a length of at least 96 inches but not exceeding 374 inches, with a polyvinylidene fluoride (PVDF) coating on the exterior facing and a polyester coating on the interior facing;

(z.7) Insulated structural panels, consisting of a mineral-wool core bonded to steel facings of 22-gauge, 24-gauge or 26-gauge thickness, with a width of 42 inches or 43 inches, of a length of at least 8 feet but not exceeding 48 feet, with a thickness of 3 inches or of at least 4 inches but not exceeding 8 inches

(a) Welded metal fasteners, “Weld Studs”, cold forged or hot forged, threaded or unthreaded, headed or unheaded, tapped, with or without a collar, flanged and un-flanged, with diameter of at least 2 mm but not exceeding 32 mm;

(b) Insulation fasteners and weld pins for HVAC ductwork and insulation installation

(a) Armour bolts, of carbon or alloy steel, forged, hardened and tempered, with oval heads, oval collars (anti- rotation), UNC-2A threads, with a nominal diameter of at least 1.5 inches but not exceeding 2 inches, with a length under head of at least 7 inches but not exceeding 45 inches;

(b) Threaded hex bolts, of stainless steel, of grade 316L, of a nominal diameter of 0.375 inches or 0.5 inch, of a length of 3.25 inch, 3.5 inches or 5.5 inches, with thread pitches of 13 or 16 threads per inch

(a) Double-ended stud, of standard M8, with thread pitch of 1.25 mm and length of 37 mm, with external 6-lobe drive and 17.5 mm header point, with acid treatment and zinc or nickel coating;

(b) Double ended stud, of standard M8, with a thread pitch of 1.25 mm and length of 25 mm, pan head serrated neck, of grade 10.9, zinc coating;

(c) Double ended stud, of standard M6, with a thread pitch of 1 mm, of grade 10.9, with zinc coating;

(d) Projection weld stud of standard M8, with a length of 30 mm, with zinc coating;

(e) Round-interior studs, of standard M6, with a diameter of 18.75 mm, with a rod diameter of 0.305 inch, plain coating;

(f) Studs, of M6 standards, with a 23.75 mm head diameter, with a 1.5 mm thread pitch, with a 25 mm length, with a rod diameter of 0.345 inch

(g) Studs, of M6 standard, of 18.97 mm head diameter of the stud, with a thread pitch of 1 mm, with a length of 21 mm, with a rod diameter of 0.305 inch;

(h) Studs, of M6 standard, with 18.97 mm head diameter, with a 1 mm thread pitch, with a length of 20 mm length, with a rod diameter of 0.305 inch

(a) Bolts, flange head, self-tapping, of standard M10, with a thread pitch of 1.5 mm and a length of 30 mm, meeting GM6202M, with a thread-forming surface treatment;

(b) Socket bolts, of standard M12, with a thread pitch of 1.75 mm and a length of 120 mm, of grade 8.8, with a corrosion-protective surface treatment, meeting automotive specifications;

(c) Clinch pins, of steel grades SAE 10B21 or 10B22, of 6 mm diameter and 12.5 mm length, with zinc-plated coating for corrosion protection;

(d) Bolts, hex flange, of standard M12, with a thread pitch of 1.75 mm and a length of 80 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating;

(e) Bolts, hex flange, of standard M12, with a length of 120 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating

(a) Hex nuts, of projection weld type, of standard M12, with a thread pitch of 1.25 mm, of grade 8 steel, with a bare surface and rust-inhibitor treatment;

(b) Weld studs, of standard M6, with a thread pitch of 1 mm, with a length of 16 mm, of specification GMW25M (8.8) with a maximum carbon content of 0.26% and plain coating;

(c) Studs, projection-weld, of standard M6, with a thread pitch of 1 mm, with a length of 25 mm, of specifications GMW25M;

(d) Studs, projection weld type, of standard M6, of 1 mm thread pitch and 20 mm length, of property class 8.8;

(e) Weld hex nuts, of standard M8, of 1.25 mm thread pitch, with head diameter of 22.5 mm, of 0.59 inch wire rod;

(f) Threaded anchor nuts, of iron or steel, with a nominal diameter of 35 mm or 46 mm

(a) Semi-autogenous grinding balls for mills, of steel containing 0.6% carbon, forged or stamped, with a diameter of 5 inches;

(b) Forged or stamped steel grinding balls for mills, heat-treated, with a diameter of 3.5 inches

(a) Steel hose clamps, single-band type, of grade 51CrV4, of specification SAE J404 6150M, of a thickness of at least 0.98 mm but not exceeding 1.08 mm, with a width of 15 mm, of a nominal size of 16 mm or 17 mm, of a closed diameter of 14.9 mm or 15.6 mm, of a full-open diameter of 17.5 mm or 18.5 mm, of a clamping force of 145 mm or 195 mm, with a chrome-free zinc-based epoxy coating;

(b) Steel hose clamps with plastic removal clips, double-band type, of grade 51CrV4, of specification SAE J404 6150M for the band and of grade PA55 Type 6.6 , of a thickness of at least 0.98 mm but not exceeding 1.08 mm, with a width of 10 mm or 15 mm, of a nominal size of 16 mm or 17 mm, with a chrome-free zinc-based epoxy coating;

(c) Steel spools, cold-rolled, of grade CQ1008 or CQ1010, fabricated with an eight-rib design, with flange diameters of 8 inches and 10 inches, with a drum diameter of 4.5 inches, with a traverse length of 6 inches, with an arbor size of 1.25 inches, painted;

(d) Steel spools, cold-rolled, of grade CQ1008 or CQ1010, fabricated with an eight-rib design, with flange diameters of 8 inches and 10 inches, with a drum diameter of 4.5 inches, with a traverse length of 6 inches, with an arbor size of 1.25 inches, painted;

(e) Breakaway couplings, machined from round ETD 4142 alloy steel bar stock, hot-wrought to a specification ASTM A29/A29M-20, galvanized after machining to ASTM A153 and packaged with hardware galvanized to ASTM A653

(f) Breakaway couplings, of alloy steel, hot-wrought, of grade ETD 4142, galvanized to ASTM A513, with hardware;

(g) Female anchoring systems for concrete, comprising a pinch-welded assembly of a stainless steel washer of grade 304, a steel coil of grade 1080 with a diameter of 0.4375 inch, a stainless steel internally threaded ferrule of grade 304 with a 0.625 inch diameter and 11 threads per inch, and a carbon steel rod of grade 1045 with a diameter of 0.4375 inch;

(h) Steel hinge assemblies, with hinge plates of grade 4140/42, galvanized to ASTM A153, and supplied with galvanized attachment hardware

(a) Welded metal fasteners, “weld studs”, of mild or stainless steel; cold forged, hot forged, threaded or unthreaded, headed or un-headed, tapped, with or without a collar, flanged or un-flanged diameters of at least 2 mm but not exceeding 32 mm;

(b) Step assemblies, of steel, with standard drive operation and power switch kit, with a step extension of 25.5 inches, with a load capacity of 300 pounds;

(c) Stainless-steel cylindrical shell, of 10-gauge SA240-304 stainless-steel plate, with an outer diameter of 38 inches, with a length of 82 inches, with an 2B interior finish and a 180-grit exterior finish, welded on two sides, wrapped in polyvinyl chloride on two sides;

(d) Steel anchor heads for post-tensioning, of specification EN ISO 683-1 or EN ISO 683-2, for strand sizes 19-0.6, 27-0.6 and 31-0.6, for intermediate grouting, comprising galvanized multi-port anchors with two 0.75-inch National Pipe Taper (NPT) ports and associated anchoring and grouting components;

(e) Grout caps for use with strand sizes 19-0.6, 27-0.6, 31-0.6, 1.375 inches and 1.75 inches, of specification EN 10130, including stainless steel pipe fittings and ball valves;

(f) Three-piece wedges of iron or steel, of specification EN 10277, with a nominal diameter of 0.62 inch;

(g) Couplings, of type ASTM C1277 or CSA B602, with a neoprene sleeve and stainless steel shield and clamps, of a diameter of at least 1.5 inches but not exceeding 15 inches